Agiltron NanoSpeed Variable Optical Attenuators & Splitters

100KHz Driver for NanoSpeed VOAs

This NS series of fast-speed driver is designed to control NS series of solid state variable optic attenuators (VOA). The push-pull output design is especially suitable for driving capacitive VOA loads, assuring the fast response time both on rising and falling of attenuation. The driver can be operated by 0-5V signal to control the attenuation of VOA. The standard driver controls one individual VOA. Drivers controlling multiple VOAs are also available.

BBN International supplies Agiltron 100KHz Driver for NanoSpeed VOAs

1x2 Nanospeed Variable Optical Splitter

The NS 1x2 Solid-State Variable Fibre Optic Splitter splits an incoming optical signal among two output optical fibres with an electrically variable power ratio. This is achieved using a patent pending non-mechanical configuration. When the electrical control signal is removed, the splitter latches to a pre-determined ratio with a standard version of 100:0. The device is bidirectional, transmitting light in both direction simultaneously. The all-solid-state crystal design eliminates the need for mechanical movement and organic materials. The NS Fibre Optic Splitter is designed to meet the most demanding switching requirements of ultra-high reliability, fast response time, and continuous operation.

BBN International supplies Agiltron 1x2 Nanospeed Variable Optical Splitter

DC to 20kHz Driver For NanoSpeed VOA

The NS VOA Driver provides driving signals for the NS series solid state VOAs. The push-pull output design ensures fast switching time for both rising and falling edges, and it is especially suitable for driving capacitive VOA loads. The standard driver controls one individual VOA. Drivers that control multiple VOAs also are available

BBN International supplies Agiltron DC to 20kHz Driver For NanoSpeed VOA

NanoSpeed Two-Stage Variable Optical Attenuator

The NS Series Variable Fibre Optical Attenuator (VOA) provides electrical control of optical power. This is achieved using a patent pending non-mechanical configuration and activated via a voltage electrical control signal. The solid-state optical crystal design eliminates mechanical movement and organic materials. The dual-stage NS Series Variable Optical Attenuators are designed to meet the high attenuation in addition of ultrahigh reliability and fast response time with minimal mechanical footprint. Agiltron also offers customised electronic designs to meet special control requirements and applications. This type of VOA is bidirectional. The NS Series VOA is available in either normally-transparent or normally opaque configurations. Agiltron’s PCB driver listed in the web is recommended to operate this device, featuring high efficiency and low cost with 12VDC power and 0-5V control input.

BBN International supplies Agiltron NanoSpeed Two-Stage Variable Optical Attenuator

NanoSpeed Variable Optical Attenuator

The NS Series Variable Fibre Optical Attenuator (VOA) provides electrical control of optical power. This is achieved using a patent pending non-mechanical configuration and activated via a voltage electrical control signal. The solid-state optical crystal design eliminates mechanical movement and organic materials. The NS Series Variable Optical Attenuators are designed to meet the most demanding operation requirements of ultra-high reliability and fast response time with minimal mechanical footprint. Agiltron also offers customised electronic designs to meet special control requirements and applications. The switch is bidirectional. The NS Series VOA is available in either normally-transparent or normally opaque configurations. Agiltron’s PCB driver listed in the web is recommended to operate this device, featuring high efficiency and low cost with 12VDC power and 0-5V control input.

BBN International supplies Agiltron NanoSpeed Variable Optical Attenuator