MSP 3000 Line Conditioning Rack Modules
Dynamic Gain Equalisation Rack Modules
The MICROSENS DGE module is an easy-to-use, effective solution to dynamically and automatically optimize your optical transport network settings.
The MS430873M provides monitoring features that give you in real time the number of installed channels, the total power, and the per-channel power available on your network.
It can also adjust all power per channel to a predefined value.
This module replaces all fixed or variable attenuators used previously on optical transport systems, since a single power per channel setting can be transferred to all available channels on the network in a single command from the NOC.
It eliminates the need to go on site or modify remotely from the NOC the transponders/ muxponders line settings as the network evolves or expands capacity.
The MS430873M can be configured in manual or automatic mode to optimize spectrum flatness across the network and improve the Optical Signal-to-Noise Ratio (OSNR) for amplifier or regeneration site suppression and a huge cost savings on the network infrastructure.
This module can be efficiently used in different locations in optical transport networks, at terminal sites and at in-line amplifier sites to optimize the performance of long haul routes.
BBN International supplies Microsens, fibre optics, fiber optics, optical network, msp 3000, dge, dynamic gain equalisation
Line Protection Rack Modules
The MICROSENS Line protection module is an optical switch module for the MSP3000 Platform that provides for a 1+1 (50 ms) or “Optical UPSR/SNCP” protection capability either at the WDM line level or card level. The Line protection cards are used in pairs, one at each end of the optical signal to be protected. At the head end of the signal to be protected, the module provides a “Bridge” capability. It accepts an input signal and replicates that signal across two fiber outputs, providing an exact copy. On the other end of the signal to be protected, the card provides a “Select” capability. It receives the two outputs generated by the “Bridge” end card and “Selects” the one that is not currently in a loss of signal state. If neither is in a loss of signal state, the signal selected is dependent on the mode the protection card is programmed for. This means of protection is what is commonly referred to as a “Head end bridge and tail end select.”BBN International supplies Microsens, fibre optics, fiber optics, optical network, msp 3000, line protection, optical switch
Optical Dispersion Rack Modules
The ODC modules are parts of MICROSENS MSP 3000 Platform and are offering chromatic dispersion compensation. MICROSENS offers a very wide range of modules that compensate chromatic dispersion of different distances (up to 240 km).
With the selection of the appropriate module a cost reduction of the network can be reached.
BBN International supplies Microsens, fibre optics, fiber optics, optical network, msp 3000, odc, optical dispersion compensation