Network Systems

Fast Ethernet Media Converter Rack Module

Fast Ethernet Media Converter Rack Module

The MICROSENS Fast Ethernet Media Converter Module enables the direct coupling of twisted pair (100Base-TX) and fiber optical segments (100Base-FX) in a Fast Ethernet network.

The converter supports half as well as full duplex connections. In the full duplex mode distances of up to 2 km can be covered (single mode: depending on version 15 km to 40 km). The direct coupling permits the extension of twisted pair connections beyond the limit of 100 m.

The link status of the segment is transferred via the converter (‘Link-Through’), i. e. in case of a link failure on the FX-side no link is generated on the TX-side.

The MICROSENS Fast Ethernet Media Converter Module enables insertion of modules in the modular 19“ Plug-in system.
Microsens 45 x 45 System Micro Switches

Microsens 45 x 45 System Micro Switches

Future-oriented cabling concepts are primarily characterised by their flexibility. With the 45 x 45 equipment design MICROSENS offers the most compact solutions of active network components on the market.

The MICROSENS FTTO concept is based on the dimensions of 45 x 45 mm (system 45 x 45). This is a widespread design throughout the world that facilitates the use in national and international installation systems. Popular areas in addition to the standard installation in wall trunking systems and under floor systems are table and laboratory equipment as well as pillars in rooms and flush-mounted installations.

The greatest advantage of the system 45 x 45 is its cost efficiency compared to the classic systems, with a 50% reduction in the time and cost expenditure required for installation. Components are no longer screwed but are simply snapped into place in the device carrier or installation sockets provided. This enables the requisite installation time to be considerably reduced.

The installation components of MICROSENS are offered as horizontal and vertical versions. The equipment is delivered in a suitable form so that no conversion or time consuming assembly is necessary on site. This means that installation time is reduced and the robustness of components is greatly increased. The system 45 x 45 – never have assembly and device integration been this fast and simple!
Microsens Desktop Switches

Microsens Desktop Switches

The MICROSENS desktop switches offer a cost effective way to realise modern fiber base networks in the LAN area (FTTO).

There are versions with Fast Ethernet or Gigabit Ethernet with different port numbers available. For high demanding applications the switches are available with management and the PoE option allows the simple implementation of VoIP applications.

Thanks to this high variety it is possible to find the ideal solution for each requirement and each budget.

The fan-less design of the devices guarantee a noiseless and realiable operation.
Microsens Industrial DIN Rail Mounted Modules

Microsens Industrial DIN Rail Mounted Modules

The IP protocol has long left the area of in-house applications and is in the process of conquering new fields of application. Industrial Ethernet is now a well-established term that describes the use of Ethernet based components with high reliability in rough environments.  

The MICROSENS devices have been designed for specific applications that are prone to failure.  An open firmware concept means that these devices can be adapted flexibly in order to suit individual customer and market requirements. Extremely challenging applications such as those related to use in the utility and railway sector as well as  in potentially explosive underground environments are underpinned by special certifications.
Microsens MSP 3000 Optical Transport Platform

Microsens MSP 3000 Optical Transport Platform

The MICROSENS Optical Transport Platform MSP 3000 provides scalable high performance networking solutions with an extended life cycle. Due to its modular design the transfer capacity of the MICROSENS Optical Transport Platform can easily grow with the ever increasing demand for new bandwidth of modern businesses and telecommunication providers, without the need to install additional costly fiber optic routes.

Demand-oriented expansion of bandwidth capacities

Because of its modular design, the MICROSENS Optical Transport Platform MSP 3000 enables businesses to upgrade the transfer capacities of their fiber optic routes incrementally and based on the actual customer demand. Thus, businesses and operators are able to keep the ideal balance between future-readiness and investment cost, while always staying flexible. If new locations have to be added to the network, or additional data centers need to be interconnected, the MICROSENS Optical Transport Platform can easily cope with these challenges and increase bandwidth capacities up to several 100 Gbps.

Paving the way to more cost efficiency with SMART technologies

The MICROSENS Optical Transport Platform  MSP 3000 is designed to reliably deliver high amounts of data with an optimal cost-per-bit ratio. The system achieves an excellent relation of transmission capacity to total cost of ownership (TCO) by incorporating a combination of SMART technologies that lowers overall operational cost and capital expenditure.

Microsens Network Management Platform

Microsens Network Management Platform

The network management platform (NMP) is a universal tool, which allows monitoring and configuring all network devices of MICROSENS. The software provides an easy to use graphical interface and several intelligent functions which supports the administrators in his daily work.

The network management tool is working with device lists, which allow grouping the devices in a tree structure. Depending on the organisation structure it is possible that one device can belong to one or several groups. Therefore settings can be made globally and be assigned to multiple devices simultaneously.

All MICROSENS devices are automatically detected by the discovery function. Even devices without IP-address are listed and can be configured. The enhanced SNMP functions allow managing all devices from the Enterprise Networks, Industrial Solutions, Enterprise Access and Metro Networks with the same tool.

Furthermore the new management platform has an integrated topology manager. With this devices can be placed graphically on any map and can be connected together. With this it is possible to monitor also individual ports and their connections beside the standard operation parameters.

For the operation of the NMP software license is required. This license has an unlimited validity. With an optional additional package the rights of the future software releases can be included.

In the server version the NMP is operating on a central server that provides access from the client via a Web interface. Up to 30 parallel access requests can be managed. When the requirements are increased the NMP server is operating redundantly in a network.
Microsens Optical Network Transceivers

Microsens Optical Network Transceivers

SFP, WDM SFP+ transceivers